Truper 101896, Руководство пользователя

Страница: 9 / 24

9
Maintenance
• Pneumatic tools require constant lubrication through the
entire service life and when operating.
• Compressed air used for the tool contains humidity. It
can rust the tool mechanism.
• To prevent this possibility, apply constantly lubricating oil
using the Brand
UNI-LL-1/4
Centralized Filter-Oil Feeder System install between the air
compressor and the tool.
• Oil in excess is immediately ejected
through the air flushing. Always keep the air flush free of
obstructions. Never point it towards people or objects.
• When not using the tool for long periods of time,
thoroughly careful lubrication is needed.
• After each 60-hours operation, the tool mechanism need
to be lightly greased. Grease in excess may lower the tool
power.
• Service the tools every 3 months only in a
Authorized Service Center. Service
and maintenance carried out by non-certified personnel
may result dangerous and can cause personal injury and
makes the product Warranty void.
• Tool malfunctioning due to failure to use the dose
lubrication recommended, not following the instructions in
this manual or repairs carried out by personnel not
certified by , is not covered in the
Warranty. We reserve the right to make technical
improvements with no previous notice.
Lubrication Service
WARNING
ENGLISH