Trumpf TruTool TKA 300, Руководство оператора

Страница: 10 / 28

10
Setting work
E605EN_01.DOC
3. Setting work
Caution
Risk of burns from hot support plates and dial ring!
¾ Wear protective gloves when setting the chamfer height.
3.1 Setting the chamfer height
1 2 3
1 Clamping lever
2 Dial ring
3 Support plate
Setting the chamfer height
The chamfer height is set with the aid of the support plate and read
by means of the number scale on the dial ring.
1. Undo the clamping lever (1).
2. Rotate the support plate (3) until the desired chamfer height
can be read off the dial ring (2). The chamfer height is
calculated as follows:
(value on the scale) + (value on the dial ring) = chamfer height.
Example: 1.5 + 0.7 = 2.2
The values on the dial ring indicate the chamfer height (1) in
mm.
Each complete rotation (=360° rotation) corresponds to a
chamfer height of 1.5 mm.
3. Fix the clamping lever (1) back into place.
Chamfer height is adjusted.
Fig. 30592