Trumpf TruTool S 450, Руководство оператора

Страница: 18 / 24

18
Operation
E465EN_04.DOC
Working with the TruTool S 450
¾ Move the On/Off switch to the front.
1
80°-90°
1 On/Off switch
1. Do not move the machine towards the workpiece until full
speed has been reached.
2. Machine/process the material.
–
Move the device forward at an angle of 80 to 90° to the
sheet surface (Illustration).
Cutting radiuses
•
Do not tilt the machine.
•
Proceed with a low feed rate.
Cutting on the edge
•
Cut in upside-down position.
•
The fixed blade carrier faces upwards.
¾ Move the On/Off switch to the front.
Switching on the
TruTool S 450
Working with the
TruTool S 450
Fig. 28475
Switching off the
TruTool S 450