Trumpf TruTool S 450, Руководство оператора

Страница: 15 / 24

E465EN_04.DOC
Tool assembly
15
3.5 Setting the height of the moving cutter
blade
In order to ensure the realisation of optimum cutting behaviour for
both the slitting of metal sheets and the cutting of curved lines, the
clearance between the moving cutter blade and the fixed cutter
blade (penetration depth into the sheet) must be adjusted in
accordance with both the projected cutting task and the sheet
thickness.
6
3
5s
5t
X
27
38
2
1
1 2
1 Direction of rotation 1: Setting
value x becomes smaller
2 Direction of rotation 2: Setting
value x becomes larger
3 Fixed blade carrier
5s Moving cutter blade (upper
blade)
5t Fixed cutter blade (lower blade)
6 Ram
27 Turning handle with scale for
height adjustment of the moving
cutter blade (example for sheet
thickness of 4.5 mm)
38 Fixed point on the scale
x
Setting value (height clearance
between upper and lower
blades)
1
Height adjustment of the moving cutter blade
1
* The ram is located at the upper dead point
Fig. 17460