Trumpf TruTool S 450, Руководство оператора

Страница: 13 / 24

E465EN_04.DOC
Tool assembly
13
3.4 Setting the cutting clearance
5s
1s
3
5t
2
1t
a Blade clearance = cutting
clearance
1s Fixing screw for the moving
cutter blade
1t Fixing screw for the fixed cutter
blade
2 Adjusting screw
3 Fixed blade carrier
5s Moving cutter blade
5t Fixed cutter blade
1. Push the On/Off switch several times until the moving cutter
blade (5s) has reached the lower dead point.
2. Pull the machine plug out of the plug socket.
3. Screw on the fixed cutter blade (5t) loosely with the fixing
screw (1t).
4. Using the adjusting screw (2), set the fixed cutter blade (5t) to
the desired cutting clearance.
5. Check the cutting clearance with a feeler gauge.
6. Tighten the fixing screw (1t).
7. Tighten the adjusting screw (2) slightly.
Fig. 14844