E390EN_04.DOC
Tool
assembly
9
3.2 Setting the cutting clearance
The blade clearance "a" is factory-set to a sheet thickness of 1.0 m
when the machine is first delivered.
Set the following values to obtain optimum cutting results:
Sheet thickness "s" [mm]
Blade clearance = cutting
clearance "a" [mm]
0.3-0.6 0.1
0.8-1.2 0.2
1.3-1.6 0.3
1. Push the On/Off switch several times until the moving cutter
blade has reached the lower dead point.
2. Loosen the lower blade.
3. Set the blade to the required clearance using the adjusting
screw.
4. Retighten the blade.
5. Tighten the adjusting screw slightly.
6. Check clearance with the setting gauge.
Table 4
