E390EN_04.DOC
Maintenance
13
5.1 Changing the blade
Danger
Possible lethal danger due to electric shock!
¾
Pull the plug out of the socket when carrying out tool changes
and before all maintenance work on the machine.
Upper and lower blades are identical. They each have 4 cutting
edges and can be used interchangeably.
In the event of insufficient cutting performance, rotate each of the
blades by 90° respectively or replace them.
1. Loosen the screw on the respective blade.
2. Rotate blade by 90°.
3. Tighten
the
screw.
Note
Take care to ensure that the adjusting screw (18) is up against the
lower blade.
a Blade
clearance
12 Ram
13 Fixing
screw
17 Upper blade and lower blade
18 Adjusting
screw
Fig. 24015
