Trumpf TruTool PN 130 Скачать руководство пользователя страница 17

Страница: 17 / 20

TruTool PN 130 (1A1)

Maintenance

Disassembling the punch

1. Release the lever (5) by at least three revolutions.

2. Pull carrier (4) out of the housing (1).

3. Remove punch (3).

Installing the punch

1. Lubricate the punch (3) and carrier (4) with lubricating grease "G1".

2. Hang the punch (3) in the groove of the punch holder (2).

3. Insert the carrier (4) into the housing (1).

4. Tighten the lever (5).

Changing carrier

1. Release the lever (5) by at least three revolutions.

2. Pull out carrier (4).

3. Insert the new carrier (4) into the housing (1).

4. Tighten the lever (5).

5.2 Readjusting the lever

The position of the lever can be readjusted as needed.
1. Tighten the lever (5).

2. Release the screw (6) on the lever.

3. Pull off the lever (5) and clean it.

4. Align the lever (5) parallel to the motor and retighten the screw (6).

E613en_02

Содержание TruTool PN 130





















Результаты поиска

Содержание TruTool PN 130

Отзывы:

Похожие инструкции для TruTool PN 130

Бренды по названию

Популярные бренды

Trumpf TruTool PN 130, Руководство оператора

Результаты поиска

Содержание TruTool PN 130

Отзывы:

Похожие инструкции для TruTool PN 130

Бренды по названию

Популярные бренды