Trumpf TruTool PN 130, Руководство оператора

Страница: 15 / 20

TruTool PN 130 (1A1) Maintenance
5. Maintenance
Danger
Risk of fatal injury from electric shock
¾ Pull the plug out of the socket whenever tools have to
be replaced or prior to maintenance work on the
machine.
Warning
Risk of injury due to repair work not being carried out
properly!
Machine does not work properly.
¾ Repair work may only be carried out by a qualified
technician.
Caution
Damage to property caused by blunt tools!
Machine overload.
¾ Check the cutting edge of the cutting tool hourly for
wear. Sharp cutting tools provide good cutting
performance and are easier on the carrier and the
machine. Replace punches promptly.
Maintenance
point Procedure and interval Lubricant
Carrier
(punch guide) Replace as necessary.
Lubricate upon tool change. Lubricating grease
"G1"
(order no. 0344969)
Punch Replace as necessary. -
Ventilation slots Clean as needed. -
Gearbox and
gear head After 300 operating hours,
have a trained specialist
relubricate or replace the
lubricating grease. Lubricating grease
"G1"
(order no. 0344969)
Maintenance table Table 5
E613en_02
15