Trumpf TruTool N 200, Руководство оператора

Страница: 11 / 20

E609EN_01.DOC
Operation
11
4.2 Changing the cutting direction
The direction of the cut can be rotated to the right or the left in 5°
increments as needed.
•
For right-handed/left-handed operation.
•
Machining sectional sheets.
2
1
1 Sleeve 2 Tool
1. Push the sleeve (1) up until it stops.
2. Turn the tool (2) to the desired direction.
3. Release the sleeve (1) and turn the tool (2) slightly such that it
locks into the next index position.
4.3 Making inner cutouts
¾ Make a start hole at least 16 mm in diameter.
Fig. 25666