Trumpf TruTool N 200, Руководство оператора

Страница: 10 / 20

10
Operation
E609EN_01.DOC
4. Operation
4.1 Working with the TruTool N 200
Warning
Risk of injury due to improper handling!
¾ Make sure the machine is always in a stable position when
operating it.
¾ Never touch the tool while the machine is running.
¾ Always move the machine during work away from your body.
¾ Do not operate the machine above your head.
1. Turn the safety lever (8).
2. Press the lever (9) against the motor housing.
Note
The cutting result is improved and the service life of the punch
increased if the cutting track is coated with oil before machining the
workpiece.
Material Oil
Steel Punching and nibbling oil ( 0.5 l, order no. 103387)
Aluminum Wisura oil (1 l, order no. 125874)
1. Do not move the machine towards the workpiece until full
speed has been reached.
2. Machine the material.
–
Machine the desired cutting line
3. In the event that the cutting track ends in the sheet, pull the
still-running machine a few millimeters back towards where the
cutting track has already been cut open.
4. Switch the machine off.
¾ Release the lever.
The lever springs back to initial position, the compressed air is
interrupted.
Switching on the
TruTool N 200
Table 4
Working with the
TruTool N 200
Switching off the
TruTool N 200