4.
Operation
Damage to the machine due to improper handling.
Ø
Make sure the machine is always in a stable position when
operating it.
Ø
Never touch the tool while the machine is running.
Ø
Always operate the machine away from your body.
Ø
Do not operate the machine above your head.
Damage to property due to excessively high line voltage
Motor damage
Ø
Check the line voltage. The power supply voltage must cor-
respond to the information on the nameplate of the machine.
Ø
When using an extension cord that is longer than 5 m, the
cord must have a line diameter of at least 2.5 mm².
Damage to property due to turning the gear switch during
operation.
Damage to the gearbox can be a consequence.
Ø
Use the gear switch only when the motor is running down or
at rest.
In order to improve the cutting result and increase the service
life of the punch, coat the cutting track with oil before machining
the workpiece.
Material
Oil
Steel
Punching and nibbling oil for steel (0.5 l, order
no. 0103387)
Aluminum
Punching and nibbling oil for aluminum (1 l, order
no. 0125874)
Tab. 6
14
Operation
E232en_06
WARNING
CAUTION
CAUTION
