1
On switch
2
Off switch
3
Release switch
4
Die
5
Punch guide
6
Wearing plate
7
Die carrier
9
Punch
14 Clamping screw (= fixing screw
for the die carrier)
16 Handle
22 Eccentric shaft
24 Cap screw (2 pieces) for fas-
tening the handle or suspension
bracket
40 Gear switch
46 Roller holder
A
Suspension bracket (optional)
Nibbler TruTool N 1000
Fig. 54784
1. Put the machine into a stable position.
2. Switch on the machine briefly:
−
Press the release switch (3).
−
Press the On switch (1) and Off switch (2) at the same
time.
3. While the motor is running down, turn the gear switch (40) to
the desired position.
3.4
Setting the penetration depth
Notes
■
A greater penetration depth causes less vibrations, but a
greater effort is required when pushing the machine forward
and the service life of the punch is reduced.
■
The penetration depth of the punch into the die should be 1
to 3 mm.
12
Select punch
E232en_06
