1.
For your safety
The machine meets the requirements of safety standard ANSI
B11.3.
This chapter describes the safety concept. The chapter
describes how potential dangers can be avoided. The overview
of residual risks contains measures to be taken by the operator
in order to reduce the residual risks.
Notes
■
The operator must adhere to the valid safety and accident
prevention regulations of the respective country and the
safety laws of the state and of the region!
■
USA and Canada: TRUMPF also recommends that the
safety regulations for ANSI press brakes be observed.
Certain operations can be a source of danger during operation.
The documentation contains warnings before the instructions for
these activities. There are warning plates on the machine.
A warning contains signaling words that have been explained in
the following table:
Signaling word
Description
DANGER
... refers to great dangers. If not avoided, it can result
in death and serious injuries.
WARNING
Refers to a dangerous situation. It could lead to seri-
ous injuries, if it is not avoided.
CAUTION
... indicates a potentially dangerous situation. It could
lead to injuries, if it is not avoided.
NOTICE
If such a situation is not observed, it can lead to dam-
age to property.
Signaling words
Tab. 1-1
Example of a warning:
Risk of fatal injury due to falling load!
Ø
Observe safety regulations for the handling of heavy loads.
Ø
Never walk under a suspended load.
Ø
Use certified tackle and means of transportation of sufficient
size.
Ø
Employ qualified technicians to transport the machine.
Ø
Carry out transport in accordance with the transport regula-
tions.
B1161en
2019-07-09
For your safety
1
‐
3
Regulations and guidelines
Chapter Safety
Warnings and warning signs
DANGER
Содержание TruBend 2000 Series
Страница 74: ...2 46 Electrical connection Version 1 B1161en...
