Trumpf TKF 104 - 1, Руководство оператора

Страница: 12 / 12

10 GB
TKF 104 - 1 E254en1_02.doc
Wearing parts
TKF 104 Order no.
Cutting tool (Standard) 088503
Cutting tool for high-tensile materials 089335
Cutting tool for aluminium 005014
Special heavy-duty cutting tool
for machining high-tensile materials
110399
Stripper 30°/37.5°/45°(40)* 104313/314/315
Wearing plate (43)* 104297
Support Fig. (50)* 109921
*See item in the spare parts list.
Original accessories
Accessories delivered with the machine
Description Order no.
Cutting tool (installed)
Quick-release coupling (machine part)
141944
Quick-release coupling (hose part) 141945
Allan key DIN 911-12 067920
Allan key 118860
Cheesehead screw M14x25-8.8 DIN 912 099123
2 cheesehead screws
to fasten handle (37)* M14x45-8.8 DIN 912 105083
Cheesehead screw (59)*
M8x12-12.9 DIN 912 014907
3 clamping sleeves (42)*
4x12-FDST DIN 7344 070858
Handle (38)* 103555
Slide handle Fig. (53)* 110400
Roller guide (56, 57, 58)* 104305
Grease gun 068624
Punching and nibbling oil for steel (0.5l) 103387
Lubricating grease "S1" 121486
(cutting tool guide lubrication)
Operating instructions
128640
Safety instructions (red print) 125699
* See item in the spare parts list.
Options
Case 121585
Suspension bracket 105001
Chip bag 116199
Punching and nibbling oil for aluminium (1l) 125874
Muffler for motor, complete
114244
Ordering spare parts and wearing
parts
To avoid delays and wrong deliveries, please
proceed as follows when ordering replacement parts:
•
When ordering spare parts or wearing parts,
please use the 6-digit TRUMPF stock number of
the respective part.
•
Other information required with an order:
-
for electrical parts: voltage
-
required quantity
-
machine type
•
Information required for shipping:
-
your exact address
-
desired mode of shipment (e.g. air mail,
express mail, ordinary freight, parcel post,
etc.)
•
Send your order to your TRUMPF
representative.
You will find a list of TRUMPF
representatives at the back of this
operating manual.
Notes on documentation
The document was written by the Technical
Documentation department of
TRUMPF
Werkzeugmaschinen GmbH + Co.
KG
All rights reserved, particularly those concerning the
duplication, distribution and translation of this
documentation, even in the event of property right
registration.

TRUMPF Werkzeugmaschinen GmbH + Co. KG