Trumpf TKF 104 - 1, Руководство оператора

Страница: 9 / 12

E254en1_02.doc TKF 104 - 1
GB
7
Selecting a cutting tool
The following cutting tools may be used to machine
sheets made of various materials and with various
tensile strengths:
Fig. 9666
Cutting tool Order no.
•
for mild steel (= standard cutting tool) 088503
•
for high-tensile sheets 089335
•
for aluminium 005014
•
heavy-duty cutting tool 110399
Warning: Optimal application of the heavy-duty
cutting tool is guaranteed only in conjunction with
speed control (Option for electrical model of the
bevelling machine). Order no. of speed control:
081763
Sharpening the cutting tool
Fig. 9666
•
The cutting tool for mild steel (order no. 088503)
and high-tensile sheets (order no. 089335) has
two cutting edges. It must be resharpened when
both edges are blunt.
•
Resharpen the cutting tool at the ends (90°) on
the front side if both cutting edges are blunt.
The minimum length must be maintained.
Shorter cutting tools are useless.
•
The cutting tools for aluminium and the heavy-
duty cutting tools are sharpened slantways at the
front side. Please observe the corresponding
sharpening diagram.
Sharpening diagram for cutting tools for the TKF 104 bevelling machine Fig. 9666
A = working direction
K = Marking on the upper
end to distinguish
between a standard
cutting tool for mild steel
and a cutting tool for
high-tensile sheets
K K
min. 95 mm min. 95
mm
088503 089335
min. 95
mm
005014
110399
A
min. 103 mm
A
A
A
A
A
A
A