Trumpf S 160 - 7, Руководство оператора

Страница: 7 / 8

E241en1_2.doc S 160 - 7
GB
5
Wearing parts
S160 Order no.
2 standard cutters
for processing constructional steel
126471
2 chrome-steel cutters
for processing high tensile sheets
(type plate "Cr")
919760
Note:
Moving cutter blade (top cutter) and fixed cutter
blade (bottom cutter) have the same shape and
are mutually (top or bottom) interchangeable.
All cutters have 4 cutting edges. These are not
regrindable "fourfold-reverse blades".
Original accessories
Accessories delivered with the machine
Description Order no.
Tool set
(top and bottom cutter, installed)
Sleeve 058378
(Item 331 in the spare parts list)
Allan key DIN 911-2 002946
Allan key DIN 911-3 067830
Operating manual 128636
Safety instructions (red print) 125699
Case 345243
Ordering spare parts and wearing
parts
Please proceeds as described below in order to
prevent delays and incorrect deliveries:
•
Copy the page found opposite the replacement
part figure as "Order form for replacement parts
and wearing parts"
•
Complete this form by stating
−
the manufacturing No.
−
the voltage, when ordering electrical
parts
−
your exact address in the "Dispatch
address“ space
−
the desired amount of parts in the
"Parts“ column
−
the desired mode of dispatch (e.g. air
mail, special delivery, express, cargo,
parcel-post, etc.) in the line with the
symbol
•
Should you wish to order wearing parts, write this
in the empty space at the end of the order form.
To differentiate between various tool types,
please observe the chapter "Wearing Parts."
•
Send the completed form (per fax) to your
TRUMPF representative.
You will find a list of TRUMPF
representatives at the back of this operating
manual.
Notes on documentation
The document was written by the Technical
Documentation department of TRUMPF
Werkzeugmaschinen GmbH + Co.
All rights reserved, particularly those concerning the
duplication, distribution and translation of this
documentation, even in the event of property right
registration.

TRUMPF Werkzeugmaschinen GmbH + Co.