Trumpf BendMaster 150, Руководство оператора

Страница: 220 / 258

10. Solving problems and
troubleshooting
Problems which occur frequently during the fine position recogni-
tion process are described and possible solutions illustrated by
means of examples in the following sections.
The following things must always be checked first if problems
occur regarding the fine position recognition:
■
Correct position of the BendMaster when recording the
image.
■ The entire selected search contour is on the recorded image.
■ The distance between the sheet surface and the upper edge
of the BendMaster's covering hood is exactly 333 mm when
recording the image.
■ Good quality of the recorded image; all edges of the part are
easily identifiable.
10.1 Problem: no part recognized
There are no results from the position recognition process:
No position recognition results Fig. 52490
4
‐
126
Solving problems and troubleshooting 2015-06-01
B579EN
First check
Error description