5
Safety instructions
To protect you from electrical shocks, injury or burns
the following basic safety principles must be observed
when using electrical devices. Please read and follow
these instructions before using the device.
Installation
Ensure that the devices are fixed with all 4 mounting holes
safely and cannot fall. Always position the cables to ensure
they do not pose a tripping hazard. Do not expose electrical
devices to rain. Do not operate electrical devices in damp or wet
environments. Do not operate electrical devices close to
flammable liquids or gases.
Protection against electrical shocks
Only operate devices with undamaged casings and cables.
Ensure the cables are installed safely. Do not pull on the
cables.
The solar panel generates power when light is cast on it. The
full voltage is also available even if there is little light. The open
circuit voltage may be twice as high. Do not touch any live
parts. Cover solar modules with e.g., cardboard, before
mounting and installing, or disconnecting.
Use
This device has not been designed for use by people
(including children) who have restricted physical, sensory, or
mental abilities or a lack of experience and/or knowledge, unless
they are supervised by a person responsible for their safety or
have received instructions from that person as to how the
device is to be used.
Children should be supervised to ensure they do not play with
the device.
Do not use electrical devices for purposes other than those
stated by the manufacturer. The ventilation slits in the housing
must be free and may not be covered by luggage, towels, or
clothing etc.
Caution
Batteries may generate explosive gases during charging and
operation. Keep away from flames and ignition sources.
Ensure there is sufficient ventilation in the battery chamber.
Repairs
Do not repair or modify the device. Please contact your dealer
or the Truma Service see
www.truma.com
or 01283 587960.
Accessories
Only use accessories and additional devices that are supplied
or recommended by the manufacturer.
Intended use
**Increased capacity with manufacturer’s written approval.
The solar dual battery charger controller only serves to
charge 12vDC lead accumulators comprising 6 single cells
(for example leisure battery) with a capacity of 80 – 110**
Ah (SDC12) or 80 – 200** Ah (SDC25). The device was
developed for connection to solar modules. Only use suitable
modules for example Truma SM 25, 40, 65, 80, 100, 120, 150
or 180. Observe the maximum voltage and power draw
values. The preferred application fields for the automatic
charger are batteries with gel, AGM or liquid electrolyte.
The device is designed for installation a dry indoor environment.
Содержание SDC12
Страница 3: ...3 ...
