24
34020-01385 · 00 · 07/2022
EN
Maintenance
Truma CP plus
If the cause has not been remedied, the malfunction
will occur again and the CP plus will go to the “Mal-
function” menu level again�
If the fault code flashes in the control panel display, this
cannot be reset until up to 15 minutes have elapsed�
Cause not eliminated / return to the setting level
Press the Back button�
In this case, the malfunction is not acknowledged in the
CP plus and the warning symbol remains� The appliance
remains in malfunction state� Other connected appli-
ances can be operated�
10 Maintenance
The CP plus requires no maintenance� Use a damp,
non-scouring cloth to clean the front panel� If this is not
sufficient, use a neutral soap solution�
11 Disposal
Dispose of the CP plus in accordance with the administra-
tive regulations of the country in which it is used� National
regulations and laws (in Germany, for example, the End-
of-life Vehicle Regulation) must be observed�
12 Technical data
Screen
LCD, monochrome, with
background lighting
Dimensions
(L x W x H)
92 x 103 x 40 mm
Operating temperature
range
-25 °C to +60 °C
Storage temperature
range
-25 °C to +70 °C
Interfaces
CP plus
TIN bus
CP plus CI BUS
TIN bus, CI bus
Power supply
8 V – 16�5 V DC
Power consumption
max� 65 mA (100 % back-
ground lighting)
6�5 mA – 10 mA (stand-by)
Quiescent current
consumption
3 mA (Off)
Weight
approx� 100 g
Protection class
Class III
Protection type
IP00
Subject to technical changes�
