34020-01385 · 00 · 07/2022
13
EN
Operation
Truma CP plus
6.3 Switching on/off
Switching on
Press the rotary push button
•
Previously set values / operating
parameters are reactivated after
switching on�
Switching off
Press the rotary push button for
more than 4 seconds.
•
After 2 seconds, “APP” is dis-
played on the screen (if iNet Box is
connected)�
•
"OFF" appears after another
2 seconds�
•
Due to internal time lags of the
heater or air conditioning system,
it may take a few minutes for the
Truma CP plus to switch off�
If you park your vehicle in an enclosed space or
if you will not be using it for an extended period,
during winter for example, you must switch off the
CP plus�
6.4 App mode with iNet Box
Switch on app mode
Press the rotary push button for about 2 seconds un-
til “APP” appears on the screen�
Release the rotary push button�
Ending app mode
If no commands are entered via the Truma App, app
mode can be closed on the Truma CP plus�
Briefly press the rotary push button�
The saved values are then applied next time it is put
into operation�
6.5 Setting the room temperature
The room temperature setting depends on the operating
mode (HEATER, AC, AUTO)� You must select the mode
before setting the room temperature� (This is unneces-
sary if just one appliance is connected to the CP plus�)
Each operating mode has its own adjustable room
temperature range� In other words, different room tem-
perature ranges can be selected in heating, cooling or
automatic mode�
