9
Truma warranty policy
The warranty is given by Dometic Pty Ltd, Building 3B,
Clayton Business Park, 1508 Centre Road, Clayton, Victoria,
3168, for 12 months from the date of purchase against any
defect arising from faulty materials or workmanship.
Repairs will be carried out during normal business hours only by
Dometic Pty Ltd, or its duly authorised service agents, and are
subject to the warranty conditions and exclusions hereunder.
Warranty conditions
The company will only provide service on presentation
of proof of purchase, on either the Truma product, or the
Caravan / RV / Pleasure Craft in which the Truma product
has been installed, to any authorised service agent. The pur-
chaser must allow the service agent to photocopy the proof
of purchase to facilitate his claim to the manufacturer.
Warranty repairs can only be performed by authorised serv-
ice agents and under no circumstances will Dometic reim-
burse repairs carried out by unauthorised persons. Tamper-
ing with any part of the product by unauthorised personnel
will automatically void the warranty.
The product must be used solely for domestic purposes
only. If the product is used for commercial purposes the
warranty is 6 months only.
Where applicable, the products must be used on the ap-
propriate electrical voltage, gas type and pressure, or fuel
source.
If at any time during the warranty period any part or parts
are replaced with a part or parts not supplied or approved
by Truma, this warranty shall immediately become void.
Important notice
Before calling a service technician please check carefully the
operating instructions, service booklet and warranty terms and
conditions. If the product fails for any of the reasons detailed
therein, or is faulty due to abuse, misuse or improper installa-
tion, then a service fee shall be charged to the purchaser.
If you have any queries regarding the interpretation of the
warranty you should contact Dometic Pty Ltd.
Whilst this book represents service outlets at the time of
printing, changes occur from time to time. Should you have
any queries or wish to locate your nearest authorised service
agent please contact Dometic Pty Ltd.
Warranty does not cover
Any appliance which has been:
(a) Subject to misuse, neglect, accident or alteration by any
person.
(b) Damaged or destroyed by fire, flood, act of God or other
inevitable accident.
Fair wear and tear.
Damage from foreign substances such as dirt or liquid.
Travelling expenses or call out fee to and from authorised
service agents premises.
Accommodation or Site Expenses.
Cleaning of the system. This is considered to be a part of
normal product maintenance.
Non operation of the appliance or resultant damage to the
unit where the appliance has been operated in an out of
level situation.
Freight cost of the appliance or parts, to or from, point of
service or transit damage.
Dometic / Truma are not responsible for resultant loss or
damage sustained by the purchaser.
Non operation of the appliance or resultant damage to the
unit where the appliance has not been installed, ventilated,
flued or operated in accordance with the manufacturers
instructions.
Apart from any warranties implied by the Trade Practices Act
1974 or any relevant State legislation all other warranties ex-
press or implied whether arising by virtue of statute or other-
wise are hereby excluded.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Installation and repair of the device may only be carried out by
properly qualified professionals. Before staring work, read the
installation instructions thoroughly and follow them carefully!
Scope of delivery
External unit:
1 Aventa comfort
2 brackets
4 screws, M6 x 70, coated with sealant
6 screws, M6 x 12, coated with sealant
1 roof thickness adapter (base ring)
2 roof thickness adapters (each 10 mm)
1 remote control with mounting
2 screws 2.9 x 16 for mounting
2 batteries, type AAA
1 set of instructions for installation and use
1 installation template
3 Wago terminals
Air distributor:
1 air distributor, fully assembled
Intended use
This unit was designed for installing in motor homes and cara-
vans. It is intended for domestic use. Any other applications
are only possible after consultation with Truma.
Location selection
The vehicle roof (roof thicknesses from 25 to 110 mm) must
be level and smooth.
There are 3 installation options:
A new cut-out has to be made (350 x 380 mm)
Cut-out from an existing skylight (400 x 400 mm)
without
sealing frame (accessories)
Cut-out from an existing skylight (400 x 400 mm)
with
seal-
ing frame (accessories) (Operating instructions are supplied
with the sealing frame.)
Please always take the following requirements into
account:
If at all possible, the unit should only be installed a little way
from the centre of the vehicle.
Check that installation will not be obstructed in any way.
There may be electrical cables running between the inside
and the outside of the roof. Disconnect all voltage sources
before starting work (all poles).
The maximum permitted roof load must not be exceeded
(see the vehicle manufacturer‘s specification).
Check the internal installation location for obstructions.
A wooden reinforcement frame must be fitted around
the cut-out in the roof between the upper and lower roof
surface (min. 25 mm). It may be necessary to remove the
insulation.
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
Installation instructions
