background image

-3-

Handle the strip with clean and dry hands; lancing site for the test   

    should be cleaned and dried thoroughly. 

 

 

Do not perform the test while a cell phone is used beside; prevent 

    the electronic signal interference.

Oxygen concentration in air is low may cause the test inaccurate;

    there is no effect from altitude up to 10,000 feet above sea level.

Medical therapy for intravenous injection, such as immunoglobulin 

    preparations and peritoneal dialysis solutions

,

containing sugar 

    compounds may cause higher test results

.

Hematocrit 

(

Hct

)

 range from 30-55% is acceptable

.

Hct less than

 

  

30% may cause elevated result

.

Hct above 55% may cause reduced 

  

glucose results versus a whole blood reference

Do not drop the product

.

Keep the lancets and lancing device out of the reach of the children.

 

o

Keep the meter and test strips at room temperature (10-30 C

).

1.3 Intended Use

TBG-460GC  Blood Glucose and Cholesterol Monitoring System 
is intended to be used for quantitative measurement of blood glucose 
level and cholesterol level in fresh capillary whole blood drawn from the
fingertips. It is intended for use outside of body (In Vitro diagnostic
use). It should be use only as an aid to monitor blood glucose and 
cholesterol level by individuals at home and by healthcare professionals
at clinical settings.

Содержание TBG-460GC




















Отзывы: