Set the Day
1. Press up/dowm button until the correct day
appears.
2. Press the “memory” button, and the hour segment
will start blinking.
Set the Hour
1. Press up/ down button until the correct hour
appears.
2. Press the “memory” button, and the minute
segment will start blinking.
Set the Minute
1. Press up/ down button until the correct minute
appears.
2. Press the “memory” button then measurement unit
segment starts blinking.
1. Press the up/dowm button until
the correct measurement unit
appears.
2. Press the “memory" button
will show "OFF" on the screen
and power off.
Chapter 3 How to perform Test
3.1 Before Testing
-7-
Coding the Meter
TRULY
TRULY
TBG-460GC meter should be coded before testing with
test Strips for the first time, or every time a new box of test strips is
used. Each vial of test strips has an assigned code number. The code
strip is packaged with the test strip in order to calibrate/code the meter.
Every time a test strip is inserted, please be sure to check the code
number appearing on the screen is the same as the code number
marked on the test strip vial.
