-9-
3.2 Connect iOS device via Bluetooth
Prior to first use, Download and install "TRULY" application to your iOS
device.
(
Bluetooth 4.0 capabilities, e.g. iPhone 4S, iPhone 5, NewiPad
and iPadMini)
1. Installation
1. Remove the end cap by gently pushing it down and away from the
lancing device.
2. Insert the lancet firmly into the lancet holder until it comes to a stop
and remove the protective lancet cover.
3. Replace the end cap by snapping it back onto the lancing device
body.
4. Select the skin penetration depth by turning the depth selector until
the desired number can be seen in the selection window. 5 levels of
skin penetration: The higher the number, the deeper it pricks.
5. Pull the part located at the back of the device until it comes to a stop
and then release.
6. Place the lancing device firmly against the finger and press the
release button to obtain a blood sample. After finishing your blood
test, dispose the used lancet safely in an appropriate container.
8
4.
5.
6.
2.
on Measure screen.
Open "TRULY" application, and then press the Blood Pressure icon
