Adjust Ice Thickness
Ice thickness Setup:
6
Press the + or - botton for 3 seconds, the digital tube display C1 at the first two
place, the last two start flashing and enter the ice thickness setting state. At this
point, every time you press the + (or -) button, the number displayed on the
digital tube increases(or decreases) by 1, that means the thickness of the ice
increases (or decreases) by 1 minute, the adjustment range is 0~35 minutes. If the
button is not pressed within 10 seconds, the digital tube will stop flashing and enter
the normal operation state. At the same time, the ice thickness data is saved. If the
cleaning button is pressed, the ice thickness data is directly saved and entered into
normal operation mode.
