Maintenance
9
Please carry out the maintenance according to the requirements of this manual,
so as to improve the reliability and service life of the ice machine. And avoid increasing
the energy consumption coefficient of ice production while maintaining sanitation.
1.Clean the area around the ice machine regularly, to keep the blinds of the ice
machine which are used for ventilation from clogging.
2.Clean the shell with a neutral cleanser, then wipe it clean with a soft cloth. If
necessary, commercial stainless steel cleaner and polishing agent can be used.
3.Filter element should be checked regularly. Most of the filter element within 6 months
should be replaced, or according to the instructions on time replacement.
4.The water tank and ice bin can be cleaned with water pipes, but do not have
excessive water pressure. Do not directly flush the water pump and upper part of ice
grid, to prevent the circuit flooding.
5.Condenser of air cooled Ice machine:Clean the condenser every three months. Use
a soft brush or a vacuum cleaner with a brush to scrub the condenser’s fins from up
to down along the fin direction to avoid damaging the fin and affecting the cooling
effect.
The instruction manual is an integral part of the product, please keep it properly.
Any maintenance of the ice
machine is not covered by the
manufacturer’s warranty.
The filter element should be
replaced regularly.
The edge of wind condenser fin
is sharp, please be careful
when cleaning.
Before cleaning and
maintenance, make sure to turn
off the water and power
sources and pull the plug.
Please pay attention to cleaning
the scale inside the ice maker
to ensure that the waterway is
not blocked.
