Trueshopping
Initial high pressure rinse
The next step is to spray the cleaning surface with water
to clear off any dirt or grime that may have collected on
the surface. This will allow your detergent to attack the
deep down dirt that has worked its way into the cleaning
surface. Before triggering the gun, adjust the nozzle to a
wide fan pattern and slowly adjust to the desired spray
pattern. This will help you avoid applying too much
concentrated spray to the surface which could cause
damage.
Final rinse
Start final rinse at bottom and work upward. Make sure
you thoroughly rinse the surface and that all detergent
has been removed.
Shut down
1. Be sure all detergent is flushed from system.
2. Turn off motor.
3. Turn off water supply.
4. After motor and water supply are turned off, trigger gun
to depressurise system.
