Trueshopping
Nozzle cleaning instructions
A clogged or partially clogged nozzle can cause a
significant reduction of water coming out of the nozzle
and cause the unit to pulsate while spraying. To clean out
the
nozzle:
• Turn off and unplug unit.
• Turn off water supply. Relieve any pressure trapped in
the hose by squeezing trigger 2-3 times.
• Separate lance from gun.
• Rotate nozzle to the narrow stream setting. This opens
up the fan blades.
• Using included tip cleaner, or an unfolded paper clip,
insert wire into the nozzle hole and move back and forth
until debris is dislodged. (See Figure 5.)
• Remove additional debris by back-flushing water
through the nozzle. To do this, place end of a garden
hose (with water running) to end of nozzle for 30-60
seconds.
