TrueLife Care Q10 BT, Руководство пользователя

Страница: 7 / 64

– 7 –
9. ERROR MESSAGES AND TROUBLESHOOTING
If any of the following problems occur when taking a reading, please refer to the
table below.
Problem Probable Cause Remedy
Nothing appears
on the display
when the
thermometer is
turned on.
The batteries are low. Replace all batteries with new
ones.
The batteries are inserted
incorrectly.
Check and, if necessary, insert the
batteries correctly so that their
polarity matches the markings in
the battery compartment.
Error message
1 (E1)
The ambient temperature is not
between 10 and 40°C
(50°F ~ 104°F).
Place the thermometer in a room
for at least 30 minutes at a room
temperature between 10 and 40°C
(50°F ~ 104°F).
"Hi" message In forehead measurement mode:
the temperature is higher than
42.0°C (109.4°F).
In ear measurement mode:
the temperature is higher than
42.2°C (109.4°F).
In surface measurement mode:
the temperature is higher than
100°C (212°F).
Carefully read the instructions on
how to take a reading and then
take another reading.
"Lo" message
In forehead measurement mode:
the temperature is lower than
35.0°C (93.2°F).
In ear measurement mode: the
temperature is lower than 35.0°C
(93.2°F).
In surface measurement mode:
the temperature is lower than
0°C (32°F).
Carefully read the instructions on
how to take a reading, make sure
the sensor is clean, and then take
another reading.
10. SPECIFICATIONS
Measuring range Body temperature: 35.0°C–42.2°C (93.2°F–109.4°F)
Surface temperature: 0°C–100°C (32°F–212°F)
Measurement deviation Body temperature: ± 0.2°C (0.4°F)
Surface temperature: ± 1.0°C (2.0°F)
Measurement distance Forehead body temperature: 2–3 cm
Surface temperature: 1–2 cm
Measurement time
≤2 s
HR
SLO
SL
HU
PL
SK
CZ
DE
EN
HR
SLO
SL
HU
PL
SK
CZ
DE
EN