5
Setting up the recorder
When it is first installed, trueCall will record only selected calls, but
you can choose how to configure it. Options are:
Don‟t record calls -
Don‟t record any calls even if a memory
card is present.
Record selected calls
- Record only selected calls.
Record all calls
- Automatically record every call.
This can be done through your Internet Control Panel (see the
Internet Control Panel & Weblink Guide) or through the setup menus
(option 4 then option 5 from the main menu. See the trueCall
Reference Guide page 17 for information about using the setup
menus).
Getting trueCall to record a conversation
If trueCall is set to „Record selected calls‟, then at any time
during an incoming or outgoing phone conversation just press
the button on the top of the trueCall unit to tell trueCall to save
the recording of the call. You will hear a beep (which won‟t be
heard by the person on the other end of the line), and
trueCall‟s red LED will flash throughout the call.
trueCall‟s
Buffered Save
feature means that even if you press
the button half way through the call, trueCall will save the
complete conversation to the memory card right from the start.
If trueCall is set to „Record all calls‟, then you don‟t need to do
anything - so long as a memory card is installed, is write
enabled, and has enough memory for half an hours recording,
then every call will be automatically recorded to the card.
trueCall‟s red LED flashes during the call to indicate that the call is
being recorded. A single call recording may last a maximum of 12
hours.
Out of respect for their privacy, it is very important that
everyone in your household, and any guests who might
use your phone, are aware that their conversations may
be recorded.
Using Call Recorder
