True TC400, Руководство пользователя

Страница: 17 / 43

CHAPTER 2: ASSEMBLY INSTRUCTIONS
Truefitness.com / 800.426.6570 / 636.272.7100
13
TREADMILL ASSEMBLY STEPS (continued):
Step 3-3 Power Inlet Assembly-220V (Optional):
a) Remove any power cords that might be attached to the
unit. Note: This step can be performed without removing
the motor cover. The power inlet assembly can safely be
pulled out about 4 inches.
b) Remove the power inlet assembly-110V from the
power panel assembly. Keep the three screws M5 x .8 for
later in this step.
c) Install the 220V power inlet assembly as follows:
Disconnect the wires one at a time as you transfer them
from the original 110V panel to the 220V panel. Note:
The 220V panel has a green, blue, and a brown color dot
on it. The colored dots correspond to which color cables
should be installed at those locations. Begin moving the
GREEN/YELLOW wire over to the GREEN dot. Next,
move the BLUE wire over to the BLUE dot. Lastly, move
the BROWN wire over to the BROWN dot.
d) Secure the power inlet assembly-220V to the power
panel assembly using three screws M5 x .8.
Hardware Required:
3 screws M5 x .8