The Microfiber mop pads are machine washable.
Wash with warm water and detergent of your choice.
Do not use fabric softener or bleach.
Lay flat to dry.
1.
2.
3.
4.
CLEANING THE MICROFIBER MOP PADS
After each use, once the steam mop is cooled down, empty the water tank and clean the external
surface of the steam mop with a damp cloth.
Use the cord wrap to safely & securely wrap & store the power cord.
Remove the mop pad and wash it following the instructions below.
Store you steam mop in a dry area.
1.
2.
3.
4.
Prepare a solution of 1/3 white distilled vinegar and 2/3 tap water and add to the water tank.
Plug in the cord and turn on the steam mop.
Let the steam mop produce steam until the vinegar/water solution runs out.
Repeat the above procedure as needed until a normal steam flow rate is achieved.
Fill the water tank with distilled water to clean.
Run the distilled water until it runs out.
DESCALING INSTRUCTIONS
1.
2.
3.
4.
5.
6.
WARNING
Do not leave the appliance unattended during the descaling process and/or while in use.
Make sure your steam mop is cooled
down before attempting to replace the
filter.
Press the water tank button and remove
the water tank from main body.
Pull out the filter until it is released from
the main body.
Place the new filter securely in to the
main body of the steam mop.
It is recommended that the water filter is
changed every 6 months
1.
2.
3.
4.
5.
REPLACING THE WATER FILTER
STORING YOUR STEAM MOP
You can find replacement parts, extra mop pads and water filters at www.trueandtidy.com
IMPORTANT
：
Allow the steamer to fully cool down before performing any care & cleaning
CARE & CLEANING
