Plug in the appliance. Since this is a powerful 1500 watt appliance, please
make sure your outlet and circuit can handle the wattage.
Press the Power Button. The indicator lights will turn red, it indicates
preheating. If the lights does not illuminate, please check the
"troubleshooting" section for more details.
The appliance warm-up time is 25 seconds. When steam mop is ready to
steam the indicator lights will turn blue.
Adjust the level of steam to your desired amount. Max is suggested for
heavy duty tile and carpet. Min is suggested for fabricated and/or coated
surfaces such as vinyl or laminate.
1.
2.
3.
4.
1. Remove the Water Tank
Press down on the water tank
release button and gently remove
the water tank.
Remove any plastic wrappings &
dispose properly.
2. Open the silicone tank cap
and fill the tank with the
provided water cup. Distilled
water is highly
recommended to prolong
the life of your steamer
3. Once full, firmly close the
silicone tank cap and secure it
back to the main unit
FILLING THE WATER TANK
POWERING ON YOUR STEAM MOP
INSTRUCTIONS FOR USE: START UP
NOTE: Upon first use of this steam mop or first use of a new water filter, the pump may make a
knocking sound while the filter fills with water. This sound is normal and may last up to one
minute. Leave the unit on while water fills the filter and tank and the knocking sound will
subside and the steam mop will emit steam.
