TruCorp AirSim, Руководство пользователя

Страница: 22 / 33

22
Quick set up guide for AirSim Advance Larynx
1. Remove AirSim Advance Larynx from the black carrier case, with blue
bag and plastic connector.
2. Connect one end of the plastic connector to the open section of the left
Bronchi on AirSim airway if you carrying out airway management on
the model. (If applicable)
3. Connect the other end of the plastic connector to the blue lung bag.
4. Ensure that the tongue is inflated with approx 20ml of air. This will
create normal lingual tension. Increasing the amount of air will create a
more difficult airway management scenario.
5. Each model shipped will be able to begin usage immediately with the
addition of the appropriate vocal cord insert but please ensure that the
larynx is in its secured resting position, and that the skin is attached to
all the Velcro points to enable a fully functioning product.
6. Ensure that the shelf accompanied with the model is secured and
positioned correctly so that it is facing away from the head so that the
laser securing apparatus can be mounted. Also please ensure the
screw nut is secured and in place.
7. When choosing on the appropriate vocal cord insert please ensure that
if a laser is being used for laser techniques that only to use the TLT
material serial codes
– LVC. This material has been tested to not give
out toxic fumes upon Co
2
laser ablation and is safe to use. Using a CO
2
laser on the silicone surgical inserts will be potentially harmful and your
warranty will be affected and you will not be viable for replacements.
When choosing the vocal cord for surgical techniques please use the
silicone vocal cord inserts with serial codes - SVC as these are
specifically designed for surgical procedures only and NOT laser
techniques.
8. When ordering the vocal cord inserts please ask for guidance upon
your intended purpose and we can guide you on the best inserts for
your application. We do advise that the inserts are only ordered as and
when for demand purposes and not ordered to build up stock as the
shelf life is short on the laser inserts.