TruCorp AirSim, Руководство пользователя

Страница: 15 / 33

15
Quick set up guide for AirSim Standard, Multi and Bronchi
1. Remove the AirSim unit from the black carrier case, with blue bag and
plastic connector (if applicable).
2. Connect one end of the plastic connector to the open section of the left
Bronchi on AirSim airway (if applicable)
3. Connect the other end of the plastic connector to the blue lung bag (if
applicable)
4.
Ensure that the tongue is inflated with approx 20ml of air. This will
create normal lingual tension. Increasing the amount of air will create
a more difficult airway management scenario.
5.
The neck can be adjusted and locked using the ‘Wing nut’ tensioner.
Using this neck lock system, the head can be accurately placed in the
‘sniffing the morning air’ position. This is achieved when the head is
moved so that the red marks on the fixed neck joint are in alignment.
For more difficult airway management scenarios the head can be fixed
in a more forward position.
6.
Using
Trucorp’s silicone lubricant ensure that the internal airway is well
lubricated including the tongue, hard palate, back of the mouth and
epiglottis. If appropriate ensure that the nasal passage is lubricated.
7.
Ensure that all airway devices are prepared to the manufactures
recommendations and instructions. Before insertion of the device
generous amounts of lubricant should be used to cover the surfaces in
contact with the AirSim airway.
8.
Please ensure that the AirSim airway is cleaned after use. Please use
warm water of a dilute (8-10% w/w) Sodium Bicarbonate solution until
all visible foreign matter and residue is removed.
9.
Please replace the AirSim unit back into the carrier case and store in
clean, dry conditions away from heat and light; avoid contact with
metals, solvents, oils or greases and strong detergents.