Installation PB-XEPI
D301144 0509
20
PB-XEPI operation modes
PROFIBUS Diagnosis
The default setting at delivery of the device is the PROFIBUS diagnosis mode. It ena-
bles monitoring of the entire PROFIBUS network. You can configure the monitoring set-
up.
Procede equal to „Checking the Ethernet connection to the device“ (see »Procedure«
on page 17).
Click on the
Settings
tab and login as an administrator. Select
Admin
as user and
enter the password (Default is the six-figure serial number of the device). Select
View
-
PROFIBUS diagnosis
. Here you can configure the settings of
Measurement
,
Alert
and
Time Server
.
If you need help, click on the question mark.
Fig. 7:
PROFIBUS diagnosis settings
PB-XEPI operation modes
