Installation PB-XEPI
D301144 0509
10
Connections and indicating elements
[1] Ethernet interface: RJ45 (10Base-T/100Base-TX)
– LED lights yellow: Ethernet data communication
– LED lights green: physical connection available
[2] LED ETH
– ETH lights red: first start phase
– ETH flashes red: boot procedure
– ETH lights red or flashes red or green in case of an error: internal failure of the
firmware.
– ETH lights green: connection to application via Ethernet
[3] LED RUN
– RUN lights red: internal failure identified
– RUN lights green: 24 V power supply is fed
[4] LED PB
– PB lights or flashes green: device communicates via PROFIBUS
[5] PROFIBUS interface: D-Sub socket
[6] Terminal strip for +24 VDC power supply
– A: 24 V (+)
– B: 0 V (-)
– C: not assigned
– D: Earth conductor
Mounting
– 35 mm DIN rail [8] (not included in the scope of delivery)
Connections and indicating elements
