Installation PB-XEPI
D301144 0509
16
Determining the network addresses
Ask your system administrator for the IP addresses or do the following:
1.
Connect your PC/notebook to the Ethernet network into which the device is to be
integrated.
2.
Start the MS-DOS prompt.
3.
Enter
ipconfig -all
. All settings for your network are displayed. Note down
the settings for
subnet mask
and
standard gateway
.
Setting the new IP and network addresses
1.
Connect a patch cable to the device.
2.
Connect a PC/notebook to the patch cable.
3.
Start a Web browser on your PC/notebook (MS Internet Explorer 6 or 7).
4.
Enter the IP address
http://169.254.0.1
and press <Enter>. The PB-XEPI
web site loads. A pop-up window opens. Please read the information carefully and
close the window after that.
5.
Then click the
Settings
tab. Information on the device is displayed in the web
browser.
Fig. 4: Setting the IP and network addresses
Determining the network addresses
