TRUArt Pyrography Pen, Руководство пользователя, Страница: 5 / 41

Copyright 2020 TRUArt LLC
5
operational temperature in less than thirty seconds – time well spent when considering
the possible alternatives that could occur by not turning the unit off.
8. If the handpiece begins to make noise and stops heating, turn it off and re-tighten the
tip holder using pliers. If that does not help - turn off the tool and replace tip. If the
handpiece still does not work with the replacement tip, it might be defective - please
contact us to arrange repair and/or replacement.
9. If a unit begins to make noise or buzz, turn it off, allow the pen to cool, and change
pens. Usually, an occurrence such as this is indicative of a shorted pen. If the noise
continues with a new pen, you should contact us to ascertain the cause of the problem
and/or make arrangements to return the unit.
10. Keep wood scraps available to check heat settings and to practice strokes. To maintain
uniformity, the test piece should be the same type of wood as the work piece you will
be working on.
Features