TRUArt Pyrography Pen, Руководство пользователя, Страница: 19 / 41

Copyright 2020 TRUArt LLC
19
Step 3
Pull out the tip, screw in the locking
nut onto the collets leaving it loose
(arrows), and insert the tip back in
again (big arrow).
Step 4
Tighten the locking nuts and your pen
is ready for some serious wood
burning.
Fitting thinner wire tips how into your wood burner collets:
You can expect the thin wire tips (20 GA) to be slightly loose in the pen. This is
especially more pronounced if you have adjusted your pen to fit larger tips already (See
Fitting thicker wire tips into your wood burner collets )
If tips are too loose or are not properly inserted, you will hear a buzzing/vibrating
sound coming from your pen. This can also short out your pen .
To avoid this, follow these easy steps using the tools already provided in your TRUArt
pyrography kit