Tru-Turf R52-ELTac, Руководство пользователя

Страница: 51 / 58

TRU-TURF R52-ELT
AC
Golf Greens Roller Manual 48
Battery Fitting Instructions
Instructions To Fit Batteries & Foam Strips
Refer to the Fig. 2 below to identify batteries and foam. The
foam strips are to be attached to the upper most part and onto
the side so that the edge of the foam strip is fl ush with the top of
the battery (see Fig. 1).
1. Place battery 1 onto the machine and locate into position,
attach foam rubber strips 1 & 2 to side and end of battery.
2. Place battery 2 onto the machine and locate into position,
attach foam strip 3 to end of battery 2.
3. Place battery 3 onto machine and locate into position, attach
foam strip 4 to end of battery 3.
4. Place battery 4 onto machine and locate into position.
5. Fit battery clamping frame over batteries and attach the 5
washers and wing nuts, fi nger tighten only.
To remove the batteries: Reverse the steps from 5 to 1, ignore
the instructions regarding the foam strips.
Fig. 2
Fig. 1
Battery 1
Battery 2
Battery 3 Battery 4
Foam Strip 1
Foam Strip 2
Foam Strip 3 Foam Strip 4
Terminal Covers not shown for
clarity of Battery Link Cables