Tru-Turf R52-ELTac, Руководство пользователя

Страница: 14 / 58

TRU-TURF R52-ELT
AC
Golf Greens Roller Manual 11
Maintenance
Service of smoothing roller bearings
• Whilst the Roller is suspended by the Trailer, check
operational smoothness of the bearings fi tted to each
smoothing roller by rotating the rollers by hand. If
bearing tightness, roughness or excessive looseness is
detected, replace the faulty bearings.
• If bearings are faulty
Remove the Smoothing Rollers.
(a) Remove the complete smoothing head assembly
from the machine. Do this by removing the four
swivel mount bolts on upper body, steering rod
and stabilizer rod, wheel the roller away until the
complete smoothing heads assembly is exposed to
work on.
(b) Remove roller shaft bolts from both ends of each
smoothing head assembly, remove smoothing
rollers from each smoothing head.
Replacing Bearings in the Smoothing Rollers
Refer to pages 35 & 36 for visual identifi cation of parts
and detailed instructions for servicing the smoothing
rollers.
Re-Assembly of Smoothing Heads Complete Assembly
to the machine.
Return the now serviced Smoothing Rollers to each
Smoothing Head, this is simply the reverse of the removal
process.
When Returning the Complete Smoothing Heads
Assembly to the machine be sure to perform the
following checks if the connecting rods were removed or
lengths altered.
Ensure the Connecting Rods are correctly adjusted so that
the three heads are parallel to each other when in the
straight ahead position.
Description Pre-Delivery Pre-Operating 12 Monthly
Transmission Oil As per manufacturers Handbook
Check Tires Max 25 P.S.I. √ √
Check Smoothing Roller Bearing √ √
Check Drive Roller Bearings
√ √
Check for loose Nuts and Bolts
√ √
Renew Transmission Oil As per manufacturers Handbook
Renew Smoothing Roller Bearings √ √
Renew Drive Roller Bearings
√ √
Renew Drive Belt (If fi tted)
√ √
Replace Trailer Strut √
Changing transmission oil
• Refer to the manufacturers recommendations.
This is located on the next pages.
Contour following drive roller
• Do not disassemble this unit unless you correctly mark the
coupling to tube alignment.
• This is important when re-assembling to ensure the correct
balance is achieved.
• Damage to either section of this roller means a complete
drive roller assembly is required, the supply of individual
components is not recommended or available.
Ongoing Maintenance, Lubricant and Replacement
Schedule (below)
Note. Areas indicated with a * need to be changed
when defective or as required. This may be before the
recommended replacement schedule. Please replace all parts
as necessary.