background image

 

 

 

________________________________________________________________________ 

 
 

 
 

 2.3 Special 

provisions 

 

 

Attention  The LactoCorder T-T is an electronic high-tec 

measuring instrument that has to be treated 
with care.  
The following actions and applications are 

prohibited

 and release the manufacturer from 

any warranty: 

1. Immersion or cleaning with high pressure 

cleaning equipment, compressed air and 
direct water jet (IP 64) 

2.  Use of solvents or solvent-based substance 

and non-standard cleaning products not 
approved for milking machines 

3. Separate mechanical or chemical cleaning 

of the probes (e.g. brushes with abrasives 
or similar) 

4.  Mechanical force effects due to impacts and 

improper handling 

5. Falls and transport damage 
6. Processing of the equipment different from 

the maintenance and repair instructions 

7. Tighten screws without paying attention to 

the pre-written torques  (Ncm) 

 

 

 

  2.4  Care 

notice 

 

    

 

 

 

    

 

The following care instructions are required to maintain 

    

 

the functionality of the LC

 

 T-T.

 

  

 
    

 

 

After measuring carry out internal cleaning 

    

 

 

with the cleaning program. 

    

 

 

Then remove the blowpipe and clean it separately. 

 

 

Содержание LactoCorder T-T














Отзывы: