Tru-Line TLT Series, Руководство по эксплуатации и обслуживанию

Страница: 5 / 33

5
Locking Knob
Mounting Disk
Locking Nut
Height Adjustment Screw
Unpacking and Assembling the System
The system is shipped for the most part complete and ready to use. However, you will
need to assemble a couple of items in order to use the system to its fullest capability.
1. To assemble the TLT-41 Calibration Bar (Fig. 1). Locate the bar which looks like a
black bar with three disks on one end. Then locate the legs for this bar. They look like a
“T”. Assemble the bar with the provided screws in the bottom of the bar. You will need a
5/32” hex key for this.
Figure 1
2. To assemble the TLT-44 Level Compensator Bar, (Fig. 2) you will find in the crate a
long bar with two pieces attached to it. You will need to slide on the base foot assembly.
When finished it should look like this.
Match to Tread Width
Figure 2