Tru-Line TLT Series, Руководство по эксплуатации и обслуживанию

Страница: 3 / 33

3
Introduction
The Tru-Line TLT-12 Laser Wheel Alignment System consists of the following
components:
2- TLT-28 Truck Wheel Clamps 1- TLT-41 Calibration Bar
1- TLT-30 Easy Check Gauge 1- TLT-44 Level Compensator
1- TLT-31 Brake Pedal Depressor 1- TLT-51 Calibration Laser
1- TLT-32 Steering Wheel Holder 1- TLT-52 Wheel Centering Target
1- TLT-36 Right Laser Gun 1- TLT-53 King Pin Center Target
1- TLT-37 Left Laser Gun 1- TLT-56 Digital Level
Documentation
Optional components:
TL – 28 Passenger Car Wheel Clamps TLT – 502 Case
TLT – 29 Aluminum Wheel Adapters TLT – 60 Frame Centering Targets
Note: Drawings of each component is included in the procedure sections to follow.
These components can be used with an alignment rack, turntables, or slip plates in the
front to do an alignment. No dedicated rack or level surface is required. Alignment of
vehicles can be easily done almost anywhere and the type of vehicle range from Tractors,
Trailers, Busses, R.V. `s, and other types of heavy equipment. All types of alignments
can be done, the most common being toe, two-wheel centerline, tracking/tandem, and
offset.
The Laser Guns are stored on the Calibration Bar, so that a complete calibration of the
system can easily be done before use. The components can also be hung on a wall. It is
recommended that the system be checked for calibration before each use and recalibrated
when needed.
Tru-Line is pleased to have you and your company as a client. We are available to you to
answer any questions that you may have. Please feel free to contact us if there is anything
further we can do to make Tru-Line a better product for you and your company.
Tru-Line
8231 Blaine Rd.
Blaine, WA 98230
360-371-0552 phone
800-496-3777 toll free
www.tru-line.net