18
9)
Rotate the wheel ½ turn, until the clamping knob is at a 3:00 o’clock position (Fig
16).
Red Adjustment Knob
Figure 16
10)
Level the TLT-30, and read the number on the caster scale.
11)
Adjust the caster bubble to the point halfway between zero and the current
reading, using the two BLACK knobs on the wheel clamp.
12)
Rotate the wheel until the clamping knob is at a 12:00 o’clock position (Fig 17).
Level the TLT-30, and adjust the caster knob until the caster bubble reads zero.
Figure 17
With the TLT-30 held in a level position with one hand (do not grasp or hold tightly),
rotate the wheel one full turn while watching the caster bubble. If the bubble does not
move more than 1/8”, the run-out procedure is complete; otherwise, repeat the procedure.
Содержание TLT Series
Страница 28: ...28 Two Wheel Centerline Alignment Figure 22...
Страница 31: ...31 Tracking...
