TRS ONE RR 2020, Руководство пользователя, Страница: 16 / 34

16
In the event of a malfunction, it is recommended turn off the motorcycle, wait 5 seconds and restart.
In case of persistent failure, check if the controller gives error code through the peephole placed inside the wheel arch.
Next we are going to describe all the codes that the operation indicator window can give us.
To better understand how the LED indicator works, The LED flashes once at power on as a confidence check and then stays on for normal operation. “1, 2” means it flashed
once and after 0.5 second pause, flashes twice.The time between two flashes is 0.25 second. The pause time between multiple flash code groups is 1 second.Code groups is
1 second.
LED CODE EXPLANATION SOLUTION
OFF
No power or switched off
1.Charge the battery.
2. Check the condition of the connectors and ensure that they have good contact.
ON Normal operation. That’s great! You got solution! You can drive the motorcycle without any problem.
1,... 2
Over voltage error 1. The battery voltage is too high for the controller.
2. Check the battery voltage.
1,... 3 Low voltage error
1. The controller will reset after 5 seconds if the battery voltage returns to its normal state.
2. Check the battery voltage and recharge if necessary.
1,... 4 Temperature warning error 1. The temperature of the controller is above 90º.
2,...1
Throttle sensor fault 1. Check that the wiring is in good condition.