IP42 models
JUMPER
Maintained: Jumper ON
Non maintained: Jumper OFF
IP65 models
Break the round area of the base and place the rubber hose for the entrance of the PVP pipe.
Mount the emergency on the wall using the 2 screws supplied with rubber washer to maintain the IP65 grade.
Connect the power supply cables (230V) to the terminal strip.
Reassemble the opal diffuser with 4 screws.
Remove the cover by using a screwdriver
lifting the cover upwards.
Install, cut the rubber & pass the cable to make connections.
FULLY RECESS IN FALSE
CEILING
Plaster:
X=277mm Y=133mm
Plasterboard: Use the frame
(ST-
28)
with the clips ST-21
SEMI RECESS IN FALSE CEILING
Plaster:
X=251mm Y=115mm
Plasterboard: use clips ST-21
Unscrew 4 screws and remove the opal diffuser
Remove the reflector using a screwdriver
