FITTING ELBOW GUARDS:
Measure mid bicep circumference 10cm up from center
elbow. Measurements should fall into one of the following size categories:
CLEANING INSTRUCTIONS:
Rinse in water, do not wash. Do not dry clean nor
bleach. Do not wring. Do not tumble dry. Do not iron. Drip dry. Do not clean your
protective gear with anything but soap and water. Do not use any abrasive cleaners
or pads. Do not use hot water or chemical cleaners or any solvents which contain
petroleum based products like benzene or gasoline on your protective gear. Your
protective gear can be weakened by these substances and may not provide its
intended protection in an accident, which can result in serious injury or death. Do
not use hair dryers or heaters to dry your protective gear.
USAGE:
This protector is designed for motorcyclists to protect against blunt
impacts within the scope of EN1621-1: 2012
LIMITATION OF USE:
Do not use at a temperature lower than -10°C or higher than
40°C. Temperature can change the impact energy absorption performance of the
product.
The elbow pad should not be loose in any area and securely in place on the arm
before use.
EN
ELBOW GUARDS
S / M
L / XL
MID BICEPCIRCUMFERENCE
25 - 33 cm
33 - 38 cm
*Measurement Instructions: Measure 10 cm from elbow center for Mid Bicep Measurement
